← All installation guides

Non Brick Set Directions

DIY Glass Shelf Brackets for IKEA Detolf Glass Display Cabinet!

Attach the shelf brackets to the Detolf frame with an Allen key. Glass or acrylic is not included. Check your shelf’s fit and suitability before placing it on the supports.

Reference IKEA Detolf

DIY Glass Shelf Brackets for IKEA Detolf Glass Display Cabinet!

These instructions apply to this item. Follow the steps below and any item-specific notes.

Purchase this item

Before you start

Tools needed

  • Allen key matching the supplied hardware
  • Level
  • Tape measure

Parts & hardware

  • Detolf shelf brackets with clamping hardware
  • Separately purchased glass or acrylic shelf
1

Check your brackets and shelf

Confirm that the brackets match your Detolf frame and that all clamping hardware is present. Inspect the shelf for damage. The original guide lists an original shelf size of about 11.5 × 15 inches and examples around 11 × 14 inches; measure your cabinet and support positions rather than choosing by those dimensions alone.

2

Set the bracket height

With the shelf removed, position the brackets on the existing cabinet frame at the desired height. Use a level to align the support surfaces. Leave sufficient clearance for the objects you intend to display.

3

Tighten the brackets

Hold each bracket in position and tighten its clamping hardware with an Allen key. Tighten gradually until it stays securely in place without deforming the printed parts. Recheck the height and level across the supports.

4

Place and check the shelf

Lower the shelf carefully onto the supports. Check that it rests fully on every support without rocking or sliding. If a bracket moves or the shelf does not fit, remove the shelf and correct the installation. Use a shelf material and thickness suitable for the intended load.

5

Shelf examples from the original guide

These are the products linked in the original guide. Check current dimensions, material, and suitability before buying. Outdated prices have been omitted. PIAOLGYI replacement shelf, listed as 11 × 15 inches and 8 mm thick: https://www.amazon.com/PIAOLGYI-Replacement-Rectangle-Accessories-Compatible/dp/B0BD7PXZVY?th=1 OPTIX acrylic sheet, listed as 11 × 14 × 0.093 inches: https://www.homedepot.com/p/OPTIX-11-in-x-14-in-x-0-093-3-32-in-Clear-Acrylic-Sheet-MC-27/202090111 Clear glass, listed as 11 × 14 × 3/32 inches: https://www.homedepot.com/p/11-in-x-14-in-x-3-32-in-Clear-Glass-91114/300068332

Installation help & FAQ · Buying FAQ