Set Specific Directions
Vertical Wall Mount for LEGO® Shuttle Carrier Aircraft (10360)
Fit the custom adapter and zip ties using the original video, then seat the aircraft on the wall cleat. These instructions cover the vertical version.
Reference 10360
These instructions apply to this item. Follow the steps below and any item-specific notes.
Purchase this itemBefore you start
Tools needed
- Screwdriver
- Level
- Fine-tip pencil
- Tape measure
- Stud finder and drill, if required by your wall hardware
Parts & hardware
- Wall cleat
- Custom set adapter
- Included zip ties
- Wall screws and anchors appropriate for your wall (supplied only if ordered)
SOURCE YOUR OWN HARDWARE
Need mounting hardware?
If you did not order mounting hardware with your mount, use the specifications and links below to source the hardware you need.
Screws & Anchors (White/Blue)
- Specifications
- 25.0-lb 3/16-in x 1-1/4-in Push-In Anchors with Screws
SEE IT COME TOGETHER
Watch the installation
Watch on YouTubeFollow along with the installation ↗Opens in a new tab so you can keep these instructions handy.
Identify the cleat and adapter
Choose the guide for the style selected in your order. These steps cover the Vertical mount. For the Adjustable option, follow https://install.bp3dprintshop.com/products/e972f634-adbd-44c9-9dbf-5045c14e7f89 instead. Lay out the wall cleat, custom set adapter, and zip ties. Watch the video to identify the attachment points and orientation. Use the vertical mount parts supplied with your order.
Prepare and secure the wall cleat
Choose a location with room for the complete set and clearance from nearby objects. Use screws and, where needed, anchors suitable for your wall material and the combined weight of the mount and set. Follow the hardware manufacturer’s instructions for hole size and installation. Check for concealed services before drilling. Hold the mounting part in position, check its alignment with a level, and mark the holes. Line up the mount with the prepared holes. Start the screws, check the alignment, then tighten gradually with a screwdriver until the mount is firm against the wall. Do not overtighten or bend the printed mounting points. If the mount moves or rocks, correct the installation before adding your set.
Attach the adapter to the aircraft
Support the aircraft while fitting the adapter and routing the ties as demonstrated. Tighten enough to retain the adapter without deforming the set. Check the orientation of the part that engages the wall cleat.
Seat the aircraft on the cleat
Lift the aircraft with help if needed and align its adapter with the cleat. Slide the set into place as demonstrated, supporting its weight until the parts are fully engaged. If they do not seat, remove the set and check the orientation.
Check the finished display
Gradually release your support only after the set is fully seated and stable. Check that the wall mount, adapter, and brick connections remain secure. If anything shifts or loosens, remove the set and correct the problem before displaying it. Support the set whenever you adjust or remove it.